Nail guns are to a great degree solid and intended to withstand intense working conditions. Nonetheless, much the same as any machine that is worked to last; they need to be maintained regularly in order to upkeep their execution and for as long as they could!
It is suggested that you clean and greases up your nail gun for each 50,000 shots. In the event that it’s being utilized in a filthy condition or nailing at a very high rate for a long period of time, at this point, maintenance should be done regularly. Cleaning nail gun is simple and should not take more than 15 minutes.
Nails guns are basic tools, yet they should be taken care of with extraordinary care. Many workers get injured every year due to misfired nails. Make sure to buy tools that meet all the normal safety standards.
Before using your nail gun, ensure to adequately read the owner’s manual and acclimatize yourself with the safety features and fundamental parts of the gun. Never try to alter the tool in any capacity.
To carry out any routine maintenance or cleaning, ensure to turn off the nail gun and disconnect it beforehand. Take the tool to an uncluttered clear area where there is plenty of light. Utilize clean nails that are free from rust for your nail gun.
When utilizing a nail gun, few drops of oil are added before beforehand. Typically, these drops are added at the base of the gun, yet you will like to also add a couple of drops of air device oil to the moving parts of the nail gun.
In case you will be using the nail gun for the whole of the day, you ought to be doing this intermittently all through your session in order to certify that the nail gun moves easily. The normal do’s of thumb is making sure that all moving parts are oiled, so one could rest assured that the gun is adequately lubricated.
This is the part which conveys air directly from the tool’s compressor unto the end of the nail gun. Inspect the valves interfacing the hose to the gun’s compressor, and those associating the hose to the finish of the weapon.
These ought to be really tight in order to avoid air leakage from the nail gun. Also look out for indications of any damage around the hose, and if vital refit another hose. You may likewise need to consider securing a hose reel to make sure your hose doesn’t lay on the floor while using the gun, as this could damage the hose, and harm the user. Find
As mentioned above that you have to oil every part of your nail gun, however, you likewise need to grease up the air fitting. You should simply put about 4 to 5 drops of oil into the gun’s air fitting every day. There are many O-rings within the gun’s air fitting, and in order to ensure these O-rings are lubricated properly, you can make use of your fingers.
An unquestionable duty to be done on any air-filled nail gun. Every day upkeep is required for a nail gun feed system. How you would go about it is to use a can filled with compressed air to blow away any debris or dust that might be stuck within the nail gun feed system.
You can likewise wipe off the feed system before proceeding to use air. It is highly recommended to use a rag that wouldn’t jam the feed system by leaving any piece of fabric behind.
In case you are utilizing a cordless nail gun, check the battery monthly and also find its expiration date. Some batteries or fuel cell, contingent upon the model, will have their expiration date or drop their charge level after sometimes. This is ought to be done on a monthly basis, particularly in the event that you see that the level by which your gun retains charge has come down.
It’s very vital to tighten any bolt or screw on your nail gun. Your nail gun screws could have been loosened by the vibration and substantial utilization of these nail guns. You might need to check your nail guns immediately just to see if the screws are tight after unpacking.
Note: Oil the moving parts, grease up the air fitting clean the feed system every day.
As we all know, a nail gun is simply an automatic tool that discharges nails onto wood, metal or any other construction materials with incredible force. In the event that you are working on building project or large-scale rebuilding, a nail gun is a vital tool and for that, should be adequately taken care of.
The above-mentioned guide will help you through inadequately maintaining your nail gun.
Nail guns are efficient power tools that are used in driving nails and staples into metal, wood and some other materials. They are utilized in the stead of the customary hand-held mallet as a result of their convenience and brisk outcomes.
Since nail guns get such a great amount of utilization on construction sites, they jam quite frequently. The task of unjamming a nail gun is amazingly simple, yet appropriate safety precautions must be followed to avoid injuries.
Nail guns are consistently utilized at a very high rate in areas like construction sites. This makes nail guns like the Bostitch N62FNK-2 more inclined to jams. The more a nail gun gets used, the more probable you are to encounter a jam.
Jams can likewise happen when you are trying to drive a nail into a material, and there is something hindering the site of passage. In the event that you unintentionally put a nail in a spot where another nail is, it will probably constrain your nail toward the exit point of the gun and thereby result in a jam.
Before tending to any issue with your nail gun, evacuate every power source, such as the fuel cell and the battery. Once your nail gun becomes inoperative, you can then proceed to clear the jam, however, make sure to keep it facing far from you.
1- Turn off the power source
Start by ensuring that the gun is turned off. Ensure that air is not stuck and then remove the batteries or cord. With that, you have maintained a strategic distance from it being turned on by mistake when working on it.
Now place a white rag underneath the nail gun to be able to see the nail effortlessly after ejecting it out from the barrel. As warned earlier, always ensure that the gun facing is far from you, to avoid any face injury that can happen when taking a shot at this undertaking.
2- Open up the barrel
The next action is to open the barrel and find the release switch. This will enable you to release the stuck or jam nails. Please note that you won’t find this switch with every nail gun. Most up to date models do, however numerous older models don’t.
So don’t freeze in the event that you don’t see one on your nail gun. On the off chance that your nail gun doesn’t have a release switch, then look inside the barrel to check for any nail that is lying down or in reverse position. So be calm to examine it in order to choose the next line of action.
3- Evacuate the stuck nails
In the event that you find a nail stuck in your gun, it is either you try pulling it out using a plier or use another nail to pry it out. Continue doing either of these until the point when the nail eventually gets out.
This might cost you much time, but if you are persistent enough, you will definitely get the job done sooner rather than later. Once more, this is just if your gun doesn’t have a release switch or on the off chance that they are actually stuck at the exit point.
4- Organize and refill
Evacuate the nails that might not be facing where they normally should be facing and refill the nail gun with nails facing the opening or the correct direction.
5- Close up and restore the power source
Close up the barrel and reestablish the power source. The power source will probably be batteries or power cord. At that point, you can start using the nail gun again.
It is normal for a jam to happen, so don’t feel upset when it occurs. Most likely you will experience a jam eventually while utilizing your nail gun, however, that doesn’t mean there is no real way to keep jamming from occurring in any case.
You can avoid most jam situations by regularly inspecting the nails to ensure they are set up as they should. If you actually set aside time to inspect, you would definitely discover early indications of a possible jam and avoid it before happening. Over the long haul, setting aside time to inspect your nails will spare you from several unjams later on.
Pneumatic nailers have replaced the hammer on wood construction especially in the roofing industry with its ability to reduce hours on the job with hammers.
However, nailers can also cause severe injuries.
Here are some nail gun safety rules and tips for you.
Here is a checklist you can use for yourself or your crew members with nailers to help ensure safety;
Item of safety | Yes | No |
Safety gear: eye and ear protection, footwear, gloves | ||
Tool maintenance: checked for loose parts, proper size of nails, trigger set up, or jams | ||
Inspection of the work area for hidden lines, pipes, or trip hazards | ||
Discuss the proper and safe use of nailer | ||
Reminder discussion of safety rules (bi-weekly or monthly) |
This checklist can be made for weekly or turned into a monthly checklist which could be dated and initialed or just a check mark made each day.
This is a good idea especially if you are running a crew, should one be injured on the job, you will have a record of the safety checks that were done.
Remember safety first always pays off in the end.
A nail gun is one of the simplest air tools on the market, in essence, they are little more than an air drive piston machine that drives the nails into whatever you are working on. This being said, the pistons in your airgun are just like those in your average car engine.
They must be properly lubricated on a regular basis. If you don’t add a few drops of pneumatic tool oil in the right places, your nail gun won’t last for very long.
The good news is that unlike many other “power” tools that have long lists of items you need to maintain them, the only thing you need to lubricate your nail gun is a bottle of pneumatic tool oil. Be aware that this is a specific type of oil that is designed for use in pneumatic (air driven) tools.
You should never attempt to use lubricants such as WD-40 as they are not designed for this purpose and their use could lead to catastrophic damage to your nail gun.
Before getting started, keep in mind that your safety is of the utmost importance any time you are performing maintenance on your nail gun. Be sure to disconnect the nail gun from the air hose before proceeding with any type of maintenance from clearing a jammed nail to lubricating the gun.
At this point, your nail gun is properly lubricated and you can reload it and return to work. As you can see the oiling process is relatively simple and should be repeated on a regular basis.
If you like videos, here is a one that explains it well:
One of the most common causes of nail gun failure is failing to keep it properly lubricated. There is more to this story than just lubrication. No matter what type of air dryer you have on your compressor if you even have one, some level of moisture is going to pass through your nail gun.
Oiling your nail gun is the best way to keep the water out of it and protect the inside mechanism from corrosion that could lead to catastrophic failure.
Now that you know how to oil a nail gun, be sure to take care of yours on a regular basis. You should oil your nail gun every five to eight hours of heavy usage. While your nail gun will blow a small amount of oil out of the exhaust port when your first lubricate it, if this continues past the first few pulls of the trigger, you are adding too much oil.
Although this will not damage your nail gun, it could end up on your project. Hold a rag loosely over the port and cycle the gun several more times to clear out the excess oil (remember to do this without any nails loaded in the gun) and you should be ready to go.
Oiling your nail gun on a regular basis every time you use it is the best thing you can do to ensure it continues to work properly and provide you with many years of flawless performance.
Whether you run a dedicated workshop or need to do a quick repair, nothing compares to the nail gun. Speed, precision, and ease of use are essential in today’s fast-paced and demanding environment. While the hammer will never go out of style, it simply is no match for the gun.
Before purchasing a nailer, you should consider a few things. A variety of nail guns are available on the market, and they cater to different needs. Also, nail size requirements differ, and guns can be powered in a few ways. The wrong nail gun is a recipe for disaster, so choose wisely. Here we run through the various nail guns that are widely in use today, and what it is that sets each one of them apart.
Power tools are extremely useful but can be very dangerous without knowing what you are doing. Thankfully, nail guns have been designed with precautionary measures, such as the dual-action contact-trip trigger feature, but nothing will ever be fail-proof.
The dual-action contact-trip trigger is a common feature in nailers. Here, the nail can only fire if both the trigger is squeezed and pressure is applied to the tip of the gun.
Still safer is the Sequential-trip-trigger which requires the trigger to be squeezed and then released, as well as pressure applied to the tip of the gun, before firing.
While safer, the sequential-trip-trigger slows things down because the trigger must be released every time, before moving on. With the dual-action-contact-trip-trigger, nails can be fired more rapidly, but the operation is higher risk.
Still, these guns operate slower than nail guns that require nothing more than squeezing the trigger. Such guns allow for “bump firing” which results in very rapid work, but can be difficult to control and very dangerous.
Nail guns are powered in several ways. Consider these three popular choices when selecting a gun.
Pneumatic nail guns are very common and are powered by compressed air. Air powered tools can be exceptionally powerful, making them a good choice for sizable tasks, however, mobility will be somewhat restricted. This is because the gun must be hooked up to the air compressor via an air hose.
Next, we have electric nail guns, that can be battery powered (cordless) or wall powered (corded). Cordless nail guns are an attractive option due to their mobility, but they do not possess nearly the amount of power as that of pneumatic guns.
Finally, fuel-driven guns require a gas cartridge to operate. These are powerful guns that can be utilized for heavy-duty work, without the restriction of a power hose.
Everything boils down to your specific needs. Know your requirements before making a purchase.
Framing nailers are serious power tools meant for heavy-duty projects, such as house framing, deck construction, and other types of heavy construction. In the main, framing guns are pneumatic, however, both battery-powered and fuel-powered nailers are sold on the market.
If you plan on using a framing nailer daily, and especially if you already own an air compressor, opt for a pneumatic. If you will be using your gun occasionally, consider the cordless. Remember that even if you already own a pneumatic, a cordless framing nailer may be necessary for tight spaces that can’t be reached with an air hose.
Framing nailers are the most powerful guns in the shed and require big nails. Framing nail guns will use up to 31/2” nails, although some cap out at a slightly lower size.
There are two types of Framing nail guns: Coil nailers and Stick nailers. Coil nailers use an adjustable canister that is loaded with a coil of up to 300 nails, held together with thin wire. These guns need to be reloaded less frequently than Stick nailers because they hold many more nails. Coil nailers can also be easier to operate due to their more compact design. Still, these guns can be very heavy when fully loaded, and may be difficult to work with, especially when doing overhead work.
Stick nailers are less popular but still much used. These guns offer a long magazine that is angled so that the nails lay one above the other. Stick nailers differ in how sharply the magazine is angled, which dictates what type of nail can be used, so make sure that you know what kind of nail you require. Often building codes set the nail requirements, so keep updated.
While Roofing nailers may look like Framing nailers, they aren’t general purpose guns. Only consider a roofing nailer if you need to apply roof shingles to roofs or for siding. While both stick and coil nail guns are potential candidates, Coil nailers are the gun of choice for roofing guns.
Some reasons why roofing guns are usually coil is because they offer more nail choices, longer working periods between loading, and the ability to carry the gun around more compactly.
Unlike framing nails, roofing nails are short and have wide, large heads. Naturally, a roofing nailer is designed to hold those kinds of nails.
The flooring nailer is arguably the most unique. These guns are specially designed to make laying floorboards fast and easy, and as such are less versatile than other nailers. When installing hardwood flooring with Flooring nailers, you should remain standing rather than getting down on your knees. This makes the whole process much easier and a lot quicker.
After your flooring is positioned correctly, simply place the gun against the edge of the board and strike the top with a mallet that most likely came with the gun. With a moderate blow, the nail will be driven precisely in place, and you can quickly slide your nail gun along to the next spot.
If you are searching for a general use gun to replace your hammer, consider the Finishing nailer. While it isn’t meant for roofing or flooring, it is arguably the most useful gun you can own.
The Finishing nailer is smaller than most and angled, allowing for easier access into tighter spaces. It uses shorter nails, typically 14-16-gauge, and 1” to 2 1/2” nails. While this gun isn’t meant for heavy-duty work, it’s excellent for many common jobs, such as baseboard installation, chair rails, indoor trim, door and window casing, crown molding, cabinet making, and more.
As mentioned, finishing guns use 14-16-gauge nails. The gauge will tell you how many nails there are per inch. The lower the gauge number, the thicker the nail. An 18 gauge (as used in a Brad nailer) means that a one-inch strip of nails holds 18 nails. A 15 gauge will hold only 15 nails, meaning that each nail will be a little thicker.
Finishing gun nails are thick enough for many uses, however, they do leave a crater. If you do not want the nails to be seen in your work, or if you are afraid that the wood may split, you need a gun that uses thinner nails.
A brad is a thinner gauge nail. The Brad Nailer is a lighter duty tool than the Finishing nailer, using 18-gauge nails that are up to 2” in length
Brad nailers are not angled and brads have thin diameters. This makes this gun an optimal choice for upholstery, narrow trim and molding, and other smaller wood projects with more risk of wood splitting. Also, because Brad guns use such thin nails, they leave a barely noticeable mark, which is ideal and often necessary for precision work.
While the Brad nailer has less general applications than the slightly larger Finishing nailer, it does come in handy, and it is necessary for delicate work. If you are looking to cover all your bases, you might want to consider a combo pack that includes a Brad.
Pin nailers use 23-gauge micro pin nails, which has a thickness like that of a sewing needle. These headless fasteners offer an impressive amount of holding power in the right circumstances, and can effortlessly penetrate the hardest woods.
23-gauge nails are ideal for delicate trim pieces. They barely leave a trace and can disappear under a coat of paint.
The Pin nailer shouldn’t be the first gun you to consider for your workshop, however, it holds a useful purpose. When dealing with delicate or refined furniture that requires needle sized nails, this gun will speed up the process and offer exceptional results.
This is a list of common nail guns. Some are more general purpose and versatile, while others are built with a specific purpose in mind. Aside from the type of gun, consider the power source, the design of the gun, and the type of nails you require.
More expensive nail guns will offer more options, but never lose focus on the essentials. Finally, consider all the safety options currently available for nail guns and choose wisely, because safety should always remain your number one priority.
Nail guns are efficient power tools that are used in driving nails and staples into metal, wood and some other materials. They are utilized in the stead of the customary hand-held mallet as a result of their convenience and brisk outcomes.
Since nail guns get such a great amount of utilization on construction sites, they jam quite frequently. The task of unjamming a nail gun is amazingly simple, yet appropriate safety precautions must be followed to avoid injuries.
Nail guns are consistently utilized at a very high rate in areas like construction sites. This makes nail guns like the Bostitch N62FNK-2 more inclined to jams. The more a nail gun gets used, the more probable you are to encounter a jam.
Jams can likewise happen when you are trying to drive a nail into a material, and there is something hindering the site of passage. In the event that you unintentionally put a nail in a spot where another nail is, it will probably constrain your nail toward the exit point of the gun and thereby result in a jam.
Before tending to any issue with your nail gun, evacuate every power source, such as the fuel cell and the battery. Once your nail gun becomes inoperative, you can then proceed to clear the jam, however, make sure to keep it facing far from you.
Start by ensuring that the gun is turned off. Ensure that air is not stuck and then remove the batteries or cord. With that, you have maintained a strategic distance from it being turned on by mistake when working on it.
Now place a white rag underneath the nail gun to be able to see the nail effortlessly after ejecting it out from the barrel. As warned earlier, always ensure that the gun facing is far from you, to avoid any face injury that can happen when taking a shot at this undertaking.
The next action is to open the barrel and find the release switch. This will enable you to release the stuck or jam nails. Please note that you won’t find this switch with every nail gun. Most up to date models do, however numerous older models don’t.
So don’t freeze in the event that you don’t see one on your nail gun. On the off chance that your nail gun doesn’t have a release switch, then look inside the barrel to check for any nail that is lying down or in reverse position. So be calm to examine it in order to choose the next line of action.
In the event that you find a nail stuck in your gun, it is either you try pulling it out using a plier or use another nail to pry it out. Continue doing either of these until the point when the nail eventually gets out.
This might cost you much time, but if you are persistent enough, you will definitely get the job done sooner rather than later. Once more, this is just if your gun doesn’t have a release switch or on the off chance that they are actually stuck at the exit point.
Evacuate the nails that might not be facing where they normally should be facing and refill the nail gun with nails facing the opening or the correct direction.
Close up the barrel and reestablish the power source. The power source will probably be batteries or power cord. At that point, you can start using the nail gun again.
Here is a short video that explains quite well on How to Deal with a Nail Jam
It is normal for a jam to happen, so don’t feel upset when it occurs. Most likely you will experience a jam eventually while utilizing your nail gun, however, that doesn’t mean there is no real way to keep jam from occurring in any case.
You can avoid most jam situations by regularly inspecting the nails to ensure they are set up as they should. If you actually set aside time to inspect, you would definitely discover early indications of a possible jam and avoid it before happening. Over the long haul, setting aside time to inspect your nails will spare you from several unjams later on.
Nailing is regarded as the most fundamental and most regularly used means of attaching members in the construction of wood frame. More often than not, nailing is used as a structural connection and thus appearance isn’t a factor. Special cases are nails utilized for decking, cladding, and finish work, by which adequate care in choosing the nail type can prompt improved appearance.
Screws depend on threads to create withdrawal resistance. Nails are quicker to install, especially with a nail gun, however, depend primarily on friction in order to resist withdrawal. Thus, designs ought to guarantee that nails are stacked laterally and that withdrawal loads are kept to a base. Nails are produced in lengths ranging from 13mm (1/2″) to 150mm (6″). While spikes are produced in lengths ranging from 100mm (4″) to 350mm (14″) and they are of tougher ratio than nails.
Nails are made in different sorts to suit particular applications. Nails are made of aluminum, brass, and copper, although regularly of steel. The steel might be galvanized or plain, the former being the right option for moist applications in which a rust-resistant nail is needed. The following is the list and all that you need to know as well about the most widely recognized types of nails.
As the name implies, these are simply your regular nails. Utilized for rough constructions, the common nail can be obtained in lengths ranging from 1 to 6 inches (2d to 60d). The most recognized common nails are known as spikes.
These nails resemble common nails, however like thinner version. This implies they are more averse to cause wood
splitting; because they displace less wood, and they additionally have less holding capacity, so are not normally utilized where the strength of the structure is critical. You will find box nails available in 1 inch to 31/2 inches.
Finishing nails are utilized to finish works. At the point when the nail head will appear in the last product (same as moldings, for instance), finishing nails are frequently utilized in light of the fact that their barrel-shaped heads are so small that they can be driven beneath the surface of the wood utilizing a nail set (a strategy called countersinking).
Finishing nails can be found in lengths starting from 1 to 4 inches (2d to 20d).
A close relation of the just mentioned nail type, the finishing nail, this casing nail is somewhat bigger and has expanded holding capacity. It is frequently utilized for joining moldings, for example, door and window casings where extra strength is needed.
Brads are basically small finishing nails, proportionately smaller in length and diameter (not more than an inch). They are utilized in frames making, joining plywood framing, and also in cabinetwork.
Roofing nails have lopsidedly vast, round heads and a little bit heavier shafts for their lengths. They are intended to hold roofing materials together, asphalt-based materials and composition.
With a specific end goal of resisting rust, roofing nails are made of aluminum or intensely galvanized. 3/4 inch to 13/4 inches in sizes are common; the penny framework is not utilized as a part of reference to roofing nails.
A few sorts of nails are being sold; all are intended to be driven into concrete or brick walls. These tough nails may have fluted shafts or be rectangular in section, however, all are hardened to resist breaking and bending as they enter rock-hard materials.
As masonry materials are, make sure to wear your safety goggles or glasses while nailing masonry nails, as flying chips are of big threat to your eyes.
The solitary surviving direct relative of the once-prevailing cut nail is this flooring nail. These nails are strong, large, and often utilized a nailing machine.
Spiral flooring nails were customarily utilized for nailing subfloors and features a spiraled shaft. Nail guns and the particularly made nails utilized with them have outdated these nails in most construction works today.
Regularly come in galvanized steel as we may know, annular ring nails are normally utilized as siding nails, to hold shingles or clapboards in place, or for framing or underlayment. They are normally thin, fixed with rings for additional holding capacity, and impervious to rust.
This can be termed as a variation the common nail type. However, duplex nail features a second head, which is formed a short distance down the pole within the end of the nail. This nail type is utilized for temporary constructions (such as staging and scaffolding) in light of the fact that it can be driven easily, yet easy to withdraw.
Drywall nails that feature rings around their necks are made for hanging wallboard; they traditionally have their heads driven somewhat beneath the surface of the plaster panel (the hammer strokes make dimples that are then filled in with joint plaster or compound).
Nails coated with cement are generally the weight and size of box nails, yet are coated using resin for additional holding capacity. They are utilized in nailing outside sheathing.
The most fundamental of clasp, nails are basic for construction works where the additional strength and cost of a screw is pointless. Common nails are meant for general utilize and are accessible in different sizes — if thickness of material permits it, pick one that is no less than three times longer than the depth of the thinner materials that are being nailed.
Traditional nails, specialty nails, and brads are intended for particular tasks or finishes and are designed in sizes reasonable for what they are intended for. The correct nail for a job should always be utilized. Always ensure that the nail you eventually pick is the one that is most suitable for the sort of job you are doing. What’s more, ensure to always patronize a company renowned for its durable and sturdy nails.
Although drilling a hole in a piece of material may seem like the simplest of tasks, having the wrong combination of drill type and bit will soon make your realize how inefficient and potentially hazardous the wrong combination can be.
In this article, we will take a look at the various tools available to perform the specific task of drilling. We’ll examine the benefits and limitations of each of these drills. In addition, we’ll look at the variety of drill bit designs and construction materials to help you find the ideal fit for your specific task.
SAFETY DISCLAIMER
It is highly recommended that you wear eye protection when working with a drill, as well as a mask if you are drilling through concrete or any other material where dust and debris may be generated in the process.
There are a wide range of options available for tools that can handle the task of drilling. The right choice for your particular task will depend on your budget for tools, the location of the item you are trying to drill, and the material you are working with. In our analysis, we take a look at corded drills, cordless drills, hammer drills, and the drill press as options to consider when determining the right fit for whatever project you are undertaking.
Although impact drivers are very adept at driving screws into wood — due to their ability to provide both radial and axial force — we have left it off this list, as our focus is solely on assessing types of drills. That said, if you are working primarily with wood and go back and forth between drilling and driving screws, the impact driver might be your best choice.
Impact drivers apply a downward-pushing force, accompanied by a characteristic clicking sound; this force is in addition to the rotational energy that comes standard with other drills or drivers. The forward motion reduces the amount of forward force the user needs to apply and helps to reduce the chance that the bit will slip out of the screw. This is especially helpful when working with hardwoods or with long screws.
If you are working on projects that require long periods of sustained drilling and you are going to be near an electrical outlet, a corded drill might just be your best option. This type of drill can be used with wood, metal or concrete materials. As we will explore later, your success with each material will depend on whether you choose the right bit for the task.
Another huge benefit of a corded drill is that it is always ready to go to work whenever you plug it into the socket. Cordless drills may require you to take periodic breaks to let the battery recharge or to purchase additional batteries or chargers to keep the production going.
All you have to think about with a corded drill is whether or not you can do the work near a plug, or if your extension cord is long enough to reach an electrical outlet.
Although it used to be true that corded drills provided more torque than cordless drills, with the increasing capabilities of batteries and cordless tool design, the difference between the two has reached the point of being almost negligible.
The choice between the corded and cordless drills really comes down to personal preference regarding power source, convenience, mobility, and ergonomics. These two types of drills vary slightly in their abilities, but they are generally so similar in performance as to make the speed and torque categories almost a toss-up.
You should choose a cordless drill as the best option for your task if you are working primarily with wood or metal, and if your material is far away from a power outlet. Although the drill press will offer the best efficiency for drilling through metal, the cordless drill or corded drill options will get the job done just as well, especially if you don’t have access to a drill press for your project. Additionally, although a cordless drill isn’t the best option for concrete, it will work in a pinch.
The hammer drill is specifically designed for working with concrete. The pulverizing action of the hammering motion combined with the drill’s rotary movement works to break up and move through concrete. This is a specific tool for a specific task.
It works great on concrete and comes in corded and cordless varieties. If you are working with concrete, stone, brick or mortar, the hammering action of these drills, along with the correct concrete bit, makes for a highly effective and useful tool.
The main drawback of this piece of equipment is its limited usage beyond stone and cement materials. While it won’t be as effective as the hammer drill, you can get away with using a concrete bit with a regular drill — this will get the job done slowly but surely. That said, if you have it in your budget to add a hammer drill to your tool set and you do regular work with concrete-type materials, it can be a valuable addition.
The bulkiest and most expensive piece of equipment on this list is the drill press. Not everyone will be able to afford or have room for this tool — but, if you do, you’ll immediately recognize its value. The drill press is designed to use a levering mechanism to produce the forward motion of the bit.
Because of this efficiency, the drill press requires the least amount of physical effort to produce the drilling action. This tool also keeps the piece and the drill bit held in uniform position, which produces very accurate and reliable results.
If you have access to a drill press and you can get the material into position on it, this should be your go-to tool for both wood and metal drilling projects. This tool is especially effective for harder and denser materials or for drilling projects that need to be highly accurate.
Drill option summary
If you are working with wood, metal, or even concrete and have to deal with repetitive tasks in a variety of locations, a cordless or corded drill will be a good all-around tool for these tasks.
However, the drill press is always going to be the most accurate and efficient tool for drilling tasks involving hardwood or metal, given the levering involved in the tool’s design, as well as its ability to hold the piece and bit in a uniform position.
Of course, not everyone has the budget or room in their shop for a drill press. If you do have one and can get your material within range the drill press is ideal, especially for more robust materials.
Likewise, although you can use a regular corded or cordless drill to do concrete drilling, the hammer drill is specifically designed for the task and will be much more efficient at producing results.
As we have seen, the effectiveness of your drilling project has much to do with the type of drill you use. Perhaps even more so, your success will be highly dependent on the bit. Here, we will take a look at the recommended bit materials and designs for wood, concrete, and metal, in order to help you make the best choice for your needs.
Bits that are designed to drill through wood will feature a pointed tip in the center of the leading edge that serves to pilot the hole. Generally, the threads of the drill will start farther back and there will be space for material to be pushed back, out of the way of the head of the bit.
If you are working with softwood, a standard steel bit will have enough toughness to bore through the material and maintain its sharpness. However, these bits will struggle more and lose their sharpness under the strain of hardwood material.
High-speed steel (HSS) bits are stronger than regular steel bits and will hold up better when working with hardwood material. HSS bits resist heat better and maintain their sharpness over a longer period of time. They are also more versatile and can be used to drill into wood, fiberglass, PVC, and soft metals like aluminum.
Combining an HSS wood drill bit with a drill press will produce the best possible results when working with wood.
Tip for drilling in wood
One of the most common issues that people run into when drilling into wood is having the spaces in the bit become clogged with material. When this happens, the leading edge is unable to move forward into the material and the drilling process stops. Make sure you clear out any debris as you drill by pulling the bit out of the hole regularly, especially on deeper cuts.
A masonry bit is designed to bore efficiently through concrete, stone, brick, and mortar. These bits have a curved tip that features a solid edge that grinds away material.
When working with harder stone and more dense material, a masonry bit with a tungsten carbide tip will provide the strongest grinding material. When working with concrete, the recommendation is to use the sharpest bit you can find.
Combining a masonry bit with a tungsten carbide tip and using a hammer drill will produce the best results when working with concrete and stone materials.
Tip For Drilling In Concrete
To cut down on dust, you may choose to inject a small amount of water into the cut while you are working, or between stages of drilling. This will also help reduce heat on the cutting edge and will keep the cutting surface clean of debris.
Just be careful that the water doesn’t get into the motor of the drill while you’re working. If you are using a hammer drill, this technique may not be plausible or effective while you are drilling but may help to clean out the hole between stages of drilling.
A cobalt (HSCO) bit is generally considered the top choice when drilling into metal. It is an upgrade from HSS materials because of the addition of cobalt. Bits that work best on metal will not have a pilot point like those designed for wood. Instead, metal bits will have a triangle shape at the tip.
Carbide is considered the hardest material in a bit. However, carbide tips are also the most brittle and have the greatest chance of snapping under strain.
The ideal combination for drilling through metal will be an HSCO bit with a drill press, used on a slow rotational setting. To cut down on heat buildup around the bit, keep the rotational speed down and use a lubricant of some kind on the cutting surface. There are numerous products on the market, termed cutting oil or cutting lubricant, which is perfect for this task.
Tips for drilling in metal
Generally, it is better to drill at a slower pace when you are working with metal. If you rotate the bit too fast, you will build up heat on the tip and won’t be giving the cutting edge a chance to catch on the surface.
You will also benefit from giving the center of the bit a place to start by punching a dent into the surface of the metal with an appropriate tool or by drilling a small pilot hole. This will keep the bit from wandering at the beginning stages of the drilling.
Finally, to keep down the temperature on the cutting edge of the bit, some form of lubrication can be applied to the drilling surface.
Most of us simply think of screwdrivers as being either slotted or Phillips. In truth, there are many other types you may not be aware of. That is, at least, until you suddenly find yourself trying to fix the washing machine, only to find some strange screw head you have never seen before.
There are more than a dozen different types of screw head in use today. This guide is designed to help you find the right screwdriver for each application.
This is the first known screw style, and even today you can still find it in use practically everywhere. The problem with these is that far too often, the screwdriver slips out of the slot or damages the slot if you are using too much force. Slotted screw heads come in a range of sizes, the most common of which are #1, #2, and #3.
The Phillips drive has become one of the most popular screw heads in the world. The design allows you to apply more force without having to worry about stripping the head. These screws come in a range of drive sizes, the most common of which are #1, #2, and #3; of these, the #2 size is the most commonly used.
Source: Phillips Screw Company
These are relatively uncommon and are typically used by manufacturers in their tools or products to keep consumers from tampering with or attempting to modify them. They look just like the standard Phillips drive, but there is a tamper-resistant pin located in the middle of the cross. These screws are not used in applications where high levels of torque are applied, as the head design is quite weak.
Source: Phillips Screw Company
We don’t see a lot of these here in the U.S., but they are very common in Europe. They look a lot like a standard Phillips drive but there are four additional contact points, designed to reduce the risk of damage under high torque. They were originally designed for use with power screwdrivers.
Source: Phillips Screw Company
This screw head looks like a combination Phillips and square recess drive. You see a lot of these being used in electronics and appliances built in China. While it looks like you should be able to use either a Phillips or square drive, you must have the right bit or you will strip the head.
These screws are becoming very popular, as they have a high resistance to “camming out”. Camming occurs when the screwdriver tip slips out of the head and damages it to the point at which the head is stripped out. The most common sizes in use today are #1 and #2, but you may find others depending on the application. This type of drive is also referred to “Robertson.” It is not made for high-torque applications.
This screw has a similar design to the standard square recess but, like its cousin the tamper-resistant Phillips drive, there is a pin in the center of the recess. This pin requires the use of a specific type of driver. They are typically used in low-torque applications, such as in electronics to help keep consumers from gaining access to the inside components.
Often referred to as a “star” drive, this six-pointed socket head was originally developed for the automotive world. However, it can now be found in other products, such as motorcycles, computers, and consumer electronics. At first, these screws were used in areas requiring some level of tamper-resistance, but now they are used in areas that require higher levels of torque due to the design’s resistance to “cam out”. Sizes are listed as T(x) and range from T1 to T100.
Also referred to as securityTorx®, these screws are exactly the same as the standard Torx® screw but have a security post in the center. This post prevents the use of a standard Torx® bit or a slotted screwdriver. You will find more of these screws used in the automotive and electronics industry as the need to protect delicate components from tampering increases.
The Torx® Plus design was introduced in the 1990s at just about the same time that the patent for the original design was set to expire. This design features lobes that are more square-shaped. This change reduces the amount of wear on both screw and bit. It also allows for more torque to be used without the risk of damage or “camming out”. It is also designed to be used at high speeds such as those seen on modern factory production lines.
This particular form of Torx screw and bit is only available to those who are licensed to use it. You must complete specific paperwork to indicate you are authorized for purchase. This is because the design is intended for use in high-security settings such as correctional facilities. Not only does this configuration have the center post in the screw head, but there are only five lobes instead of the usual six.
This is the exact opposite of the standard Torx® bit in that the torx projects from the head of the screw. Sizes are denominated by the prefix “E” instead of “T”, but do not correspond to the same sizes. The most common use for these screws is in the motor manufacturing industry. They are rarely seen anywhere else.
Originally called an “Allen” style bit after the first company to produce them, these are extremely common screws, used in a wide variety of applications. The hexagonal shape, with its six flat faces, helps ensure full contact with the driver, but it also tends to create excessive pressure on the corners. This can lead to failure if the interior socket of the head becomes deformed. They are best used in low-torque applications.
This is one of the most common screw profiles in use today. The head looks just like a standard nut in that it has six faces that sit at 120 degrees to each other. Not only can you use a hex driver on these screws, you can also use the right size wrench, an adjustable wrench, or either a six or twelve point socket. These screws are good for use in tight spots where a square head would not allow for much turning radius.
These screws and bits are only available on a very limited basis, as the screws are used by certain manufacturers to protect their equipment from misuse by the end user. They are similar in design to most tamper-resistant screws in that they have a post set in the center of the hole. They are offered in standard fractional sizes as well as metric.
Also referred to as a triangular slotted screw, it has three “slotted” wings, along with a small triangular shaped hole in the center. The slots are offset and do not actually intersect in the middle of the screw head. These screws were developed by Lockheed and the aerospace industry back in the 1970s for use on the L-1011. Today, they are most commonly found in the electronics industry.
While the above image shows a pair of holes for the spanner bit to be inserted into, you will find that the more common spanner screws simply have a pair of notches cut into the head. This design is used as a way to prevent tampering and is used in places like public restrooms and elevators. Another common use for these screws is for the soft spikes in golf shoes. There is a three notch version that is used by gun manufacturer Microtech. Leica cameras use something very similar on their rewind knobs and other levers.
This is a highly specialized type of screw that can be installed using a standard slotted screwdriver bit. However, the other side of the slots is ramped in the opposite direction. When you try to use a slotted bit to remove them, the bit simply slips out of the screw head. You will find these used to discourage vandals in public restrooms, on VIN plates on vehicles, and in many other locations. They are generally used in applications where removal is unlikely to be necessary.
This type of screw has a triangular recess in the head. The sides of the triangle are straight. They are often used in children’s toys, vacuum cleaners, elevators, fan heaters, Master® locks, camping stoves, and Breville® brand kettles. They are used in an attempt to keep consumers from disassembling the products or gaining access to areas where injury can occur.
The inside of the spline drive screw head has twelve individual splines, as does the driver of the corresponding tool. The splines all have a 60-degree angle, forming three equilateral triangles. They are commonly used in high-torque applications including locking automotive lug nuts and cylinder head bolts. You may also find them in use in other engine bolt applications.
This is a list of the most common types of screw drive styles in use; there are of course a number of others. Some of these have such limited uses that you are not likely to ever come across them. Others have been out of use for decades.
The most important thing to remember is that you should always use the right screwdriver for each type of screw head. Failure to do so could result in screw heads that become too damaged to remove — and in potential injury. The good news is that you can find tools to work with these and just about any other type of screw heads, even those that have been out of production and use for a very long time.
One last thought: be sure to check the condition of your screwdriver bits each time before you use them. A worn or damaged bit can cause severe damage to the screw head, resulting in your having to drill the screws out to remove them. There is always the right tool for any job you are likely to undertake.
Are you looking for a cordless screwdriver and want some advice on which product provides the best combination of quality and value? Are you having a hard time building your new bedroom set, outdoor patio set or anything requiring screws in order to complete your setup?
We took a look at all products that are currently on the market and considered several factors to determine our pick for the best cordless screwdriver available today.
We evaluated qualities like the size of the unit, its ability to handle working in small spaces, its torque capabilities, and its battery life and quality. Other criteria included ease of use, ergonomic design, affordability, and finally, helpful bonus features magnetized surfaces.
A cordless screwdriver is ideal for those who would like the assistance of power equipment for screwdriving tasks, but don’t necessarily need all the bulk and power of a drill. Also, it is portable, meaning you won’t have a hard time to transport it with you for different tasks.
This tool is helpful for working on craft projects, working on screwdriving tasks in smaller spaces, or for anyone who wants the benefit of portable power for basic repair or renovation jobs.
If you have arthritis, carpal tunnel syndrome, or just want to save yourself some time and energy doing work around the house, a cordless screwdriver is an excellent addition to the toolbox.
There are a couple of things to consider before buying a cordless screwdriver. These tips will inform you on what to look for before purchasing one, this will prevent you from choosing a cheap cordless screwdriver that will need to be repaired in a couple of months.
The Power
What makes cordless screwdriver such a superb tool is a strong battery, that is not the only factor but it’s one of the main ones. Usually, the battery ranges from 3.6 volts, for light duty tasks, and to 12 volts for medium-level applications. Also, due to the new innovations in battery life longevity, even the smallest cordless screwdrivers have a strong battery. That is because of the advanced lithium-ion battery, which provides the users with a stable power source. Also, lithium-ion batteries can be recharged quickly and they are environmentally friendly.
2. Torque and Speed
What is torque? Some of you might know, but for the others let’s explain it a little bit. Basically, torque measures the amount of force behind the cordless screwdriver. Allowing it’s users to rotate the screws or bits into the position. The higher the torque the more power the driver can produce, for those bigger jobs you might have. Also, we recommend looking for screwdrivers that come with torque control, so that you can adjust the control the rotation force of the tool
If your job/task consist of attaching or inserting screws into hard material like aluminum or hardwood, you should definitely look for a cordless screwdriver with a high level of torque.
As you may already know, the speed of the screwdriver is based on the number of revolutions or rotation per minutes, also called (RPM), that the driver can perform per minute. That means how fast the driver is, which is useful depending on the job you are doing.
For household jobs or light duty drilling chores, the ideal rpm your tool should have is around 180. For a medium level job, you should look into a faster driver, around 1200 to 1500 rpm, and for heavy-duty work, recommended anything over 2000 rpm.
Like many different tools, there are screwdrivers that give variable speed control. Meaning, you can use the low power speed for smaller and lighter materials, or you can choose a higher speed for tougher material.
3. Screw Type
Most cordless screwdriver offers you a choice of drill bits or screws ( Phillips head or flat head ). Generally, they come in multiple sizes and shapes, which means they are suited for almost any types of task.
4. Chuck Size
Usually, the end of the driver, where the chuck is located relates to the size of the screwdriver. The check is where the screw or drill bit is to be attached. Size can vary, so keep in mind to always check the chuck size. Also, some model offers a keyless chuck, which means you do not need any tools to remove it, perfect right?
5. Operator Comfort Features
The Clutch
Some model of screwdrivers come with a clutch. A clutch can give you more control over the torque power. We would recommend a driver that has up to 21 clutch settings, giving you more choices.
Also, some screwdrivers offer an “Auto-Stop” clutch that shuts the said tool off when the clutch is disengaged, adding even more safety for its users. This feature is extremely useful to stop any overdriving. Overdriving is when the users over strips the screw and we do not want that.
Ergonomic Features
Ergonomics is very important, even when it comes to power tools. Your best choice would be soft grip handles, that are adjustable as well, giving you the option to use the tool in a straight or pistol type in order to facilitate the job you are doing.
Another great feature is the onboard storage space offering you a storage place for all your extra bits. Some model even provides led lights, which are a great idea for working in low darker areas.
There are some different types of drivers, some are sold as a tool only, called “bare tool”. While others come with a charger and a rechargeable battery. Also, more expensive models may come with even more accessories such as extra batteries or carrying cases.
Spindle Lock
A spindle lock’s role is to let the user lock the mechanism into place so you can replace the screw manually, making your life way easier.
Here are a couple of different projects you can accomplish with a cordless screwdriver.
1- Assembling Furniture: How many times did you buy furniture and it took your hours to assemble because you didn’t have a cordless screwdriver? We can guarantee you will save a lot of time and effort with these types of screwdriver.
2- Hanging Pictures or Blinds: When it comes to hanging pictures or blinds, most people end up making a mess trying to drive screws into plaster and even causing damage to the wall, because you don’t have the right equipment. For this kind of task a modestly powered cordless drill.
3- Building a patio deck: While this project might be a little bit hard when you have no building experience or when you don’t have a power screwdriver. It can still be done manually but it will take your weeks compared to a couple of days with a cordless screwdriver.
4- Assembling a tool shed or a dog house: This one is very similar to the previous one and a little bit easier. Building a dog house can also be a very good father and son activity you can do with the help of an automatic screwdriver.
5- Hanging Shelves: How many times have you tried to hang shelves and it took several hours and at the end, you didn’t succeed? I bet you did not have a cordless screwdriver, am I right? Getting Shelves level is a task that requires a lot of precision, and precision comes from feeling comfortable with the tools being used.
As you can see, all of these DIY projects are doable with a screwdriver, but most of them will take you hours of hard work and sweat. On the other hand, you can use a cordless power screwdriver and get the same results in half the time spent on your projects. I can’t even remember the time where I had no power screwdriver.
Another great brand of power tools. This time Dewalt delivers an amazing power screwdriver, the DCF610S2. This model can easily handle most light to medium DIY tasks around your home. This cordless screwdriver is so wonderful that it is known as one of the best power screwdrivers on the market. Making it a great tool for experienced and non-experienced people.
This tool provides a fast working and has a lot of power thanks to its 12 volts 1.1 ah lithium-ion battery that goes right under the base of the screwdriver. This model is lightweight at 2.2 lbs and well balanced, also it can be used on almost any types of surface, except concrete of course. The DCF610S2 is 6-1/4 inches long, making it the ideal tool for when you are working in tight spaces. This tool is very easy to use, even for people with lesser experience. The 610S2 features a one hand loading function with a 1/4 inch hex chuck that also accepts 1-inch bit tips, making it a wonderful tool for home renovations.
This cordless screwdriver provides multiple torque settings, it can produce up to 1050 rpm. Also, there is a variable speed setting, that allows the users to change the speed setting depending on the type of material they will be driving screws into. For those tricky situations when you need to un-attach screws, this tool has a reversible function.
Another really good option this model offers is the three led lights. Making it a great tool when working in low light conditions.
This kit contains the power screwdriver, two 12-volt max lithium-ion battery packs, a battery charger, a handy belt clip for easy portability, and a carry bag.
Last but not least, Dewalt screwdriver has a three-year limited warranty, a one-year free service contract and a 90-day money-back guarantee, making it one of the best cordless screwdriver in this price range.
We are starting our list with one of the most popular brands on the market, Black + Decker. This company manufactures high-quality home and garden tools, and I can personally tell you will not be disappointed by the performance of their compact BDCS20c Screwdriver.
This amazing, lightweight little tool is the perfect choice for those light-duty and simple renovations around your home, from assembling furniture to hanging up pictures of your family. This power tool is so small it fits into the palm of your hand, making it the ideal tool for when you are working in tighter spots. Surprisingly this cordless screwdriver can handle most surface even aluminum. Unfortunately, it is not ideal on hardwood surfaces.
This model is smaller than other power screwdrivers, but it is very solid and sturdy. Also, it provides the users with a 4-volt max lithium-ion battery and it can produce 35 in. lbs of torque, 180 rpm, and thanks to it’s 3/8 inc chuck it can accept a variety of different bits. Making it an amazing tool for any renovators out there.
The trigger grip is very comfortable and easy to use when using it for your jobs, especially attaching and removing screws. This power cordless screwdriver comes with a rechargeable battery, a charger and a pack of two bits. Plus this power driver is also compatible with other Black & Decker small sized attachments.
This compact and lightweight professional power screwdriver from Hitachi offers an amazing working performance. It provides the user with that much-needed driving power and control for light to medium-duty DIY maintenance/renovation projects around your home. Making it a great tool for experienced and non-experienced people.
The DB3DL2 is powered by a strong 3.6 volt 1.5-amp lithium-ion battery that gives you fade-free long-lasting battery charge. Plus the battery recharges in a span of 30 minutes, which is wonderful especially when you only have 1 battery. This model offers it’s users a lot of control with 21 clutch settings, a bright led light that you can switch on when you need for working in darker conditions. It also offers a dual-position handle that can be used in two different positions: a straight position or a 90-degree angle. Also, there is a handy forward/reverse switch in case the driver gets stuck.
This Hitachi screwdriver has a spindle lock for tightening screws manually. It offers two different choices of speeds: the first one allows the users to reduce the speed to 260 rpms, so that the surface doesn’t get damaged when working on them. The second speed goes up to 780 rpms, perfect for drilling into harder materials.
The chuck on this model is 1/4 inch, meaning it can accommodate most other bit sizes. The DB3DL2 comes with a rechargeable battery, a charger and a carrying case, which is fantastic for the price.
Ultimately, this cordless screwdriver offers an amazing performance, it is also covered by Hitachi’s warranty. The battery is covered by a 2-year Lithium Ion battery warranty, and the charger is covered by a 1-year warranty.
Another high-performance power tool brought to you by Makita. The DF010DSE is surprisingly lightweight, but it provides a lot of power thanks to its 7.2 volt lithium-ion battery, on top of offering an excellent battery life. Also this model offer s 44 in.lbs of torque, which is amazing.
This power tool offers its users two gear speeds, one of 200 rpms and 650 rpms, depending on whether you will be working with light material or tougher material like aluminium. The clutch has 21 different settings that offer the users that much needed control. This model has an auto stop clutch function, meaning the tool shuts off when the clutch disengages. That feature not only makes sure that the screw is tightly fastened, it also protects the screw from being stripped, which happens quite often when the power tool does not have that particular function.
This tool is so wonderful that it can be used as a drill and a screwdriver, and its compact design makes it so easy to use with a soft grip handle, making it a very good versatile tool. The DF010DSE also provides an extra dual position handle allowing you to use it in a straight position or in a pistol grip position, depending on your own preference. Like most tools on our list, the 1/4 inch hex chuck makes it very easy to change the drill bits or screws.
Another convenient option is the led light, although some people have reported that the location of the led light is not the best. Despite that, having a power tool with a led light is extremely useful when the area you are working has no light, such as inside of a cabinet.
This cordless screwdriver also comes with two 7.2 volt lithium-ion batteries, a battery charger, and a tool case to store your tool. Makita offers an amazing 3-year limited warranty on the screwdriver and a 1-year warranty on the battery and charger.
Another big name in the industry of Powertool. This time Milwaukee brings a fantastic power screwdriver, the 2401-20 M12. Keep in mind this is only the bare tool, that means there is no battery or charger that comes with the tool. You will have to buy the battery and the charger separately.
This power tool is optimized for professionals who need precision fastening applications. This ergonomic tool offers a variable speed trigger going from 0 to 500 rpm, ideal for light to medium tasks. Also, the 15+1 clutch settings, a little less than our previous pick, prevent you from over tightening fasteners, which is a convenient feature for people that tend to over tighten the screws. Last but not least, it provides 175 in-lbs. of torque providing the ability to accomplish tough tasks.
The 2401-20 M12, is very compact, as it stands at 6-1/2 inches long and weighs only 2.0lbs. A more lightweight and durable design provides greater comfort and fits in those hard to get spaces. This model features an onboard LED light which helps you when you are working in places with no lights and really tight areas.
This cordless screwdriver provides two belt-clip positions for both left and right-handed users, plus one-handed bit changes provide ease of use. Once again this is only the bare tool, that means it does not come with a battery or a charger.
I’d recommend getting the M12™ REDLITHIUM™ Battery also referred as 48-11-2401 and the M12™ Lithium-ion Battery Charger, 48-59-2401. There is also a kit which contains all of those things in it plus the tool, of course. Milwaukee also offers a 5 year limited warranty
This innovative semi-automatic power screwdriver brought to you by WORX, will make your life a lot easier, allowing you to complete your favorite DIY without trouble. This model is a little different from our previous models. The screw holder attachment is located on the front of the screwdriver and all it takes is three easy steps to load the driver, hence why it different from our previous picks.
Another very useful feature, this model can hold up to 6 bits in the reloadable cartridge part. It accepts any 1/4 hex shank insert bit from slot to square to star bits. This feature is ideal if you have multiple tasks to complete. Plus this tool allows the user to change bits on the fly with a pull and push of the top slide.
The WX255L SD is powered by an internal 4-volt lithium-ion battery. The tool features multiple torque settings and enough power for small to medium DIY tasks and renovation tasks. This model is very small and compact, making it perfect to insert screws into those tight spots like the inside of a cabinet.
Last but not least this power tool includes a LED light to brighten those dark work areas. The screwdriver also comes with a 4-volt lithium-ion battery and a charger, unlike our previous model.
The Skil iXO is an elegant bright pink and black screwdriver, you can now do your DIY tasks in style. This model is ergonomic and comfortable thanks to its curved lightweight design plus it fits very well into your hand. Making it the ideal screwdriver for light-duty DIY and renovation tasks around your home.
This cordless screwdriver offers a very cool feature we don’t normally see in other models. It comes with a USB attachment, meaning it is one of the most portable screwdrivers on the market because you can charge it almost anywhere even in your car!
The Skil offers an amazing set of features that are very useful to its users. First, there is a battery gauge to alert you when you are running low on power, which is very useful when you forgot your power cord in your car. Also, this model has a site-light to illuminate darker areas, perfect for jobs inside a cabinet.
Unfortunately, this screwdriver is smaller than our previous model, but that does not mean it is not powerful. On the contrary, this cordless screwdriver is powered by a 4 volt 1.5 Ah lithium-ion battery, it has 36-in lbs max torque and can provide up to 200 rpm. As you can see, this tool is powerful enough to tightly fasten screws on top of working especially great in tighter spaces.
the 1/4 inch screwdriver can accept a wide variety of bit size, plus the magnetic tip will keep the screws firmly in place. The Skil comes with a USB charger and a 4 volt 1.5 Ah Lithium-ion battery, a very high-quality tool for the price.
This cordless screwdriver is brought to you by Tacklife. The SDH13DC is a small, elegant and powerful power tool. This model offers 3 different handle position, allowing its users to work in tighter places. Also, the handle is ergonomically designed, it provides a more comfortable reducing fatigue and stress on your wrists.
This model offers an adjustable gear range, with selected torque gear. You can choose different torque according to different screws for more accuracy and fastening. The unique electric drill function gives you the convenience for your tasks.
The motor on the Tacklife is very compact, resulting in reduced noise and saving more space. It also offers an angle adjustement switch, 45-degree, 90-degree and 180-degree, depending on your different job requirements. The metal powder metallurgy gear teeth box ensure a more reliable quality and assured life.
This power tool two types of LED light. The first one Pre-LED light, which is located at the front of the tool. The second one is the Post-LED light, located at then other end of the power tool. A very handy tool when you have to work in darker corners.
Similar to some models on our list, this one can be charged via USB using an universal phone plug USB 2.0. We find this feature particular great, as nowadays we can find USB ports around every corner. It also comes with a 31 Drill Bits(Including 1 pcs of extention bit).
Another great product brought to you by Black & Decker. The PD600 is a stylish and high quality cordless screwdriver. This model features an articulating head and you the handle can lock in three different positions, allowing you to work in tighter spaces. It is also ergonomically shaped so you will feel less fatigue and pain when working long hours with the tool.
The PD600 provides two different speed you can choose from, the first one is the lower speed with 80 in./lbs of torque, perfect for doing smaller jobs like building furniture or hanging a family photo. The second one is the higher speed for drilling holes with a 40 in./lbs of torque.
This model also provides and integrated LED light, perfect for working in darkers areas like the inside of a closet, and a 23-position clutch that helps prevent stripping. Another handy features is the quick-release mechanism, allowing you to change bits fast in a secure and easy way.
The 6-volt battery offers an amazing operating life, which is great especially for those long job or when you forget your charger. This model is a great way to start your renovation career as it offers a lot of good features at a low price. It is also pretty good for more experienced people, that is why it is considered one of the top notch cordless screwdriver on the market.
Last but not least, the DCF682N1 is brought to you by Dewalt, one of the leaders in the power tools category. This cordless screwdriver is very stylish and discrete compare to our previous picks. Whether you use it for your professional job, or for some home renovation the DCF682N1 will not let you down.
This Gyroscopic Inline Screwdriver features motion activation which allows for driving or reversing fasteners depending on the job you have to complete. To be able to switch between those two functions, the users needs to twist the tool left or right, it is very user friendly.
This model also offers motion activated variable speed from 0 to 430 rpm, great for wood, plastic, and light metal. It also provides a reversing control option for precise fastening control. Lighted illumination in darker areas allows the users to work without having to carry a lamp.
Another very good feature, is the battery state of charge display, especially when you travel a lot, with this the user will know when to charge it back up. The DCF682N1 is a great screwdriver for quick screwdriver bit change and it can hold 1″ bit tips. The 8V MAX battery pack allows for much longer run time and does not take a long time to charge back. This model includes, the screwdriver, the charger and the 8V compact battery
This concludes our guide on the best cordless screwdriver on the market. As you can see there are a lot of different choice out there, our biggest advice if find the one that most suits your working style and purchase it.
Our choice is the DEWALT DCF610S2 12-Volt Max 1/4-Inch Screwdriver Kit. For us this is simply one of the best cordless screwdriver for our jobs, from building small furniture to hanging up picture of family members. This high-quality tool comes with two 12V MAX* lithium ion battery, a fast charger, a belt hook and a contractor bag.
Like mentioned above the majority of power tools found on our list are very good, it all depends on your budget and preferred taste. Let us know which one if your favorite cordless screwdriver in the section below.